Hydraulic Gear Puller Set, 20T Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator with Carrying Case for Factories and Repair Sites 19.69 x 19.69 x 20.08 Inch

SpecificationsStyle: ModernColor: Light BlueMaterial: Alloy Steel, RubberProcess: ForgingAssembly Required: YesModel: YL-20Max. Stroke: 60mm/2.36inMax. Reach: 195mm/7.68inMax. Spread: 350mm/13.78inProduct Size(L*H): 50*51cm/19.69*20.08inHandle Length: 41cm/16.14inPackage Size: 56*28*11cm/22.05*11.02*4.33inRated Output: 20T/44092.45lbsGross Weight: 16.5kg/36.38lbsPackage Included1* Pump Body1* Handle3* Jaws1* Pull Ring6* Screws6* Pulling Tabs1* Carrying Case1* English ManualNotes1. Please read the English manual carefully before use.2. Please note that the rated output data is calculated using a calculation formula based on the size data of the length and diameter of the oil cylinder, so the rated output may have deviations and is only for reference.3. The effective distance of the piston starting rod of the hydraulic puller is only 1.97 inches, so the extension distance should not be greater than 1.97 inches during use.4. If you want to retract the piston activation rod, you only need to slightly loosen the oil return valve rod in a counterclockwise direction, and the piston activation rod will gradually retract.5. Before use, the hydraulic puller of the corresponding tonnage should be selected according to the outer diameter of the object to be pulled, saw, and load force, and avoid damage caused by overloading.6. The hydraulic puller uses (GB443-84) N15 mechanical oil (not included) at 23-113°F and (GB442-64) synthetic spindle oil (not included) at -4-41°F.

• High-quality materials: Hydraulic hub puller set is made of alloy steel with a forging process. It is suitable for factories, repair sites, railways, vehicles, etc. It is used to disassemble truck wheels, sprockets, wheel bearings, pulleys,sleeves, rotors, car axles, gears, etc.
• Wide Application: Bearing disassembly puller's 3 jaws or 2 jaws can be easily interchanged, and they can be used vertically and horizontally without being limited by the venue, suitable for different scenarios.
• Easy to Use: Hydraulic gear kit only requires inserting the handle into the top of the pump body and move the handle up and down to start working, which is easy. The pump head is very flexible and can rotate 360°.
• Easy to Clean: Brake drum puller's smooth surface and uncomplicated structure permit complete cleaning with simple towel wiping. This maintenance-friendly design eliminates complex cleaning procedures after use.
• Product Details: Hub drum rotor puller has a carrying case that allows you to store this product and easily carry it to the place you need. Use oil return switch design, when applying pressure, tighten it in the ON direction, and when releasing pressure, tighten it in the OFF direction.